Installing The Balancer Drive Gear And Balancer Driven Gear - Yamaha 2004 Rhino 660 YXR660FAS Service Manual

BALANCER GEARS AND OIL PUMP GEARS
INSTALLING THE BALANCER DRIVE GEAR
AND BALANCER DRIVEN GEAR
1. Install:
• pins
• springs
• balancer drive gear
(onto the buffer boss)
• plate
• circlip
NOTE:
Align the punch mark a on the balancer drive
gear with the hole b to the buffer boss.
2. Install:
• balancer driven gear
NOTE:
Align the punch mark a on the balancer drive
gear with the punch mark b on the balancer
driven gear.
3. Install:
• lock washer
New
• balancer driven gear nut 1
NOTE:
• Place an aluminum plate 2 between the
teeth of the balancer drive gear 3 and bal-
ancer driven gear 4.
• Apply the molybdenum disulfide grease to
the thread of axle and nut.
4. Bend the lock washer tabs along the bal-
ancer driven gear nut.
4 - 51
ENG
110 Nm (11.0 m · kg, 80 ft · lb)