Adjusting A Headlight Beam - Yamaha GRIZZLY 350 2016 Installation Manual

4. Remove the burnt-out bulb.
5. Place a new bulb into position. NOTICE: Do
not touch the glass part of the bulb. Oil
from your fingers or other contamination
will adversely affect the transparency of
the glass, luminosity of the bulb, and bulb
life. Thoroughly clean off any dirt and fin-
gerprints using a cloth moistened with al-
cohol or thinner.
8
1. Do not touch the glass part of the bulb.
6. Install the socket by pushing it in and turning
it clockwise.
[ECB00653]
7. Install the bulb cover and the cover at the rear
of the headlight. NOTICE: Make sure the
bulb cover is securely fitted over the sock-
et and seated properly.
8. Adjust the headlight beam if necessary.
EBU25553

Adjusting a headlight beam

ECB00691
NOTICE
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the headlight
beam adjusting screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).
8-43
[ECB03320]