Decorative Firebacks (Classic & Brick) - Travis Industries Travis DVL Owner's Manual

Optional Equipment
Decorative Firebacks
! Turn the gas control valve to "OFF" prior to conducting any service.
The decorative cast fireback attaches to the walls of the firebox to enhance aesthetics. Before
installing, remove the face, glass, logs, and embers. The directions below detail installation.
Side Fireback Clip
c
Install the side
firebacks and secure
with the fireback clips
and screws removed
in step "a".
Travis Industries
(Part # - Brick Pattern 98500734, Classic Pattern 98500744)
Remove the screws on
a
both side walls of the
firebox.
Make sure the
notches on the side
firebacks fit into the
grooves on the
firebox floor.
4 0 2 0 8 1 2
(for qualified installers only)
5/16" Nutdriver
5 1
b
Place the rear fireback on
the ledge at the back of
the firebox. It is held in
place by the side
firebacks.
9 3 5 0 8 1 1 0