Modifying The Face Angle For Rectangular Faces - Travis Industries Travis DVL Owner's Manual

Installation

Modifying the Face Angle for Rectangular Faces

If using a rectangular face (faces other than the Craftsman or FPX Arched), adjust the face
angles at the top corners of the glass (see the illustration below).
Remove these four
a
screws from the face
angle.
Front of
Fireplace
Glass
c
Straighten the face angle.
Travis Industries
(for qualified installers only)
Bend the face angle up and replace
b
Phillips
the two screws on the upper section.
Screwdriver
Re-bend the face angle at the
d
inward location and re-attach the
lower portion with one screw.
4 0 2 0 8 1 2
1 3
9 3 5 0 8 1 1 0