Altitude Considerations; Approved Vent Configurations; Approved Vent Components - Travis Industries Travis DVL Owner's Manual

Installation
1 8
Altitude Considerations (Rear Vent Configuration)
This heater has been tested at altitudes ranging from sea level to 8,000 feet (2,400 M). In this testing we have
found that the heater, with its standard orifice, burns correctly with just an air shutter adjustment.
! Failure to adjust the air shutter properly may lead to improper combustion which can create a safety hazard.
Consult your dealer or installer if you suspect an improperly adjusted air shutter.
Approved Vent Configurations (Rear Vent Configuration)
• The vent must terminate horizontally.
• Maximum 6' of Vent Length (not including elbow and termination)
• 1 Elbow Maximum (45° or 90°)
Approved Vent Components for Rear Vent Configuration
Description
Straight Installation Kit
Corner Installation Kit
7" Adjustable Vent Length
24" Vent Length
36" Vent Length
12" Adjustable Vent Length
Horizontal Termination Cap
45° Elbow
90° Elbow
Wall Thimble
Vinyl Siding Standoff
Rear Vent Adapter
Travis Industries
(for qualified installers only)
H2
Maximum 6' Length
Part #
98900170
98900171
98900172
98900173
98900174
98900175
98900176
98900177
98900178
98900179
98900180
98900181
4 0 2 0 8 1 2
Maximum 6' Length
(determined by adding H1 + H2)
H1
One Elbow Maximum
(90° or 45°)
DVL Fireplace
Packing List
Rear Vent Adapter
Wall Thimble
Horizontal Vent Termination (Cap)
Rear Vent Adapter
45° Elbow
7" Adjustable Vent Length
Wall Thimble
Horizontal Vent Termination (Cap)
7" Adjustable Vent Length
24" Vent Length
36" Vent Length
11-9/16" to 15-3/8" Adjustable Length
Cap
45° Elbow
90° Elbow
Wall Thimble (two mating pieces)
10" Vinyl Siding Standoff
Rear Vent Adapter
9 3 5 0 8 1 1 0