Avaya 5610 User Manual page 6

4610 and 5610 User Guide
5. Options:
Displays the Options main screen, from which display and application settings can be updated
6. Call Handling Buttons:
•
HOLD:
Red button used to place a call on hold.
•
TRANSFER:
Transfers a call to another phone.
•
CONFERENCE:
Sets up conference calls with more than one other person.
•
DROP:
Drops the current call or, if on a conference call, drops the last person to join the
conference.
•
REDIAL:
Redials the last number dialed or displays the last 6 numbers dialed from the phone,
depending on configuration via the Options menu.
7. Numeric (dialling) Pad:
Standard 12 button pad for dialling phone numbers.
8. Volume Controls:
Adjusts the handset, speaker, headset, or ringer volume, depending on which item is in use. As
you increase or decrease the volume, the top display area provides either a speaker, headset,
handset, or ringer icon to indicate for which item you are adjusting volume, followed by a visual
"volume meter" showing the volume level. These buttons also control the volume of the key click
sounds made when you press fixed buttons on the phone, such as the dial pad or soft keys.
9. MUTE:
Turns off the active speaker, handset, or headset microphone to prevent the other person from
hearing you. The associated LED lights steadily when the handset or headset is muted.
10. HEADSET:
With a headset connected, changes audio control from the handset or speaker to the headset.
The associated LED lights steadily when the headset is active.
11. Headset Jack:
Located on the side of the phone and provides a port for connecting a headset.
12. SPEAKER:
Access the speakerphone. The light associated with this button turns on when the speakerphone
is active. Note that while the speakerphone is active the handset is muted.
13. PHONE/EXIT:
Displays the phone application main screen or, if applicable, exits the current IP Office based
feature, such as Speed Dial or Call Log, and normalizes the display.
4610 and 5610 User Guide
IP Office 15-601080 Issue 0b4 (28th February 2008)
Page 6