Stabilizing The Climb Mill - Matrix Fitness C5X-01 Service Manual

CHAPTER 10: CLIMB MILL SPECIFICATIONS AND ASSEMBLY GUIDE

10.4 STABILIZING THE CLIMB MILL

STABILIZING THE MATRIX C5X-01 CLIMB MILL
The Matrix Climb Mill should be level for optimum use. Locate a level, stable surface to position the equipment. The equipment has leveling
transport wheels located under the "Control Zone" cover (Figure A). To access, grab the left and right sides of the cover and lift off. CAUTION:
There is an electrical plug located under the cover that will need to be unplugged before the cover can be completely removed. With the
"Control Zone" cover removed, adjust the transport wheels until the equipment is stable and lock the wheels into place. Once stable, plug the
electrical connection back together and place the "Control Zone" cover back into place.
FIGURE A
67