Handlebar Service - Matrix Fitness C5X-01 Service Manual

CHAPTER 9: PART REPLACEMENT GUIDE

9.8 HANDLEBAR SERVICE

1) Turn off the power and disconnect the cord from the machine.
2) All items on the handlebar are removed using a Phillips screwdriver from the underside of the bar.
3) Once the screws are removed, lift the part carefully then disconnect any wire connections to fully remove the part. This includes any
resistance, pause / stop buttons, and the heart rate grip plates (Figures A & B).
FIGURE A
FIGURE B
4) Test the Climb Mill for function as outlined in Section 9.20.
44