Replace Belts - Martin MAC 2000 Performance Service Manual

MAC 2000 Performance Service Manual
22 Secure the wires at the bottom of the
module with 3 cable ties at the corners
of the fan.
23 Connect the top fan cable to the to the
2 pins closest to the starter on the
junction print labelled "38".
24 Connect the zoom/focus microswitch
cable to the rear 3 pins of the center
socket of the right-side junction print
labelled "31".
25 Install the effect wheel module (p. 31).
Verify that the wheel turns freely and
ad j u s t t h e p o s i t i o n o f t h e r a i l s i f
necessary.
26 Install the zoom/focus module (p. 20).
R E P L A C E B E L T S
1 If replacing the focus belt, remove
• the top head cover
• front lens ring
• front lens
• framing module (p. 4)
• top fan
2 If replacing the zoom belt, remove the
• top and bottom head covers
• front lens ring
• framing module (p. 4)
• one of the effect wheel effects
Zoom and focus 26