Table of Contents
Advertisement
Section 10: Landing Gear
•
Slide the landing gear into the holes on the bottom front fuselage.
•
Place a bend in the end of the wire ties and thread them up though the bottom and then
back out on the other side. Pull them tight and trim off the extra, as shown in the image
below.
•
Slide the wheels onto the main gear and secure them with the Wheel Collars and set
screws.
•
Slide the tail wheel onto the tail wire and secure it with some drops of thick CA on the
end of the wire. BE CAREFUL not to get CA in the wheel itself.
30
Advertisement
Table of Contents
