Display Messages; Normal Operation; Maintenance - Oki OKIPAGE8c Manuallines

Display Messages

Messages on the display panel show the status of the
printer. For a complete list of messages, see the online
User's Guide. Following is a limited list of these
messages and if necessary, the recommended action.

Normal Operation

RESET TO FLUSH
(PostScript) Data currently in the printer can be deleted
by pressing the ON LINE button, then the RESET
button.
RESET
Press the RESET button to delete data left in the printer
and return the printer to the defaults you have set.
POWER SAVING
The printer is in power saving mode—the heating unit
has been turned off to save energy. When data is sent to
the printer, it automatically warms up briefly before
printing.
[paper size] [tray]
PAPER REQUEST
The printer is requesting a different size paper in the
indicated tray. Load the requested paper in the tray.
[paper size] MANUAL
[media type] REQUEST
Insert a page of the indicated size and type (paper,
envelope) in the frontl feeder.

Maintenance

TNR LOW [color]
One or more toner cartridges are nearly empty. The status
lights also indicate which color(s). Have the necessary
cartridge available. For replacement instructions, see
"Replacing a Toner Cartridge."
[color]
TONER EMPTY
The indicated toner has run out—this message appears 50
pages after the TNR LOW message. Install a new toner
cartridge. For replacement instructions, see "Replacing a
Toner Cartridge."
You can clear this message by opening and closing the
printer cover; the message appears again after 20 pages
are printed.
OIL ROLLER LIFE
The fuser oil roller needs to be replaced. When the
ATTENTION light is on, the printer can continue to
function. When the ATTENTION light is flashing,
replace the oil roller immediately. For replacement
instructions, refer to the online User's Guide.
CHG DRUM [color]
One or more of the image drums needs to be replaced.
The status lights also indicate which color(s). For
replacement instructions, see "Replacing an Image
Drum."
30