Setting The Duration - Bosch HBC36D7.3 Instruction Manual

Once the timer duration
has expired
Cancelling the timer
duration

Setting the duration

A signal sounds. The display shows Q 00:00. Press
the 0 button to stop the signal.
Press the 0 button. Press the X button and turn the
timer duration back to 00:00 using the rotary selector.
Close timesetting options using the 0 button.
When you set the duration (cooking time) for your
dish, the appliance automatically stops operation at
the end of this time. The appliance stops heating.
For types of heating involving steam, you must always
set a duration.
Example in fig.: set a duration of 35 minutes.
Prerequisite:
The type of heating and temperature are set.
Timesetting optn
Duration
00:30 h:min
Exit with 0
1. Press the 0 button.
2. Switch to Duration using the rotary selector.
Timesetting optn
Duration
00:35 h:min
Exit with 0
3. Use the X button to switch lines.
4. Set the duration using the rotary selector.
5. Close the Time setting options by pressing the 0
button.
6. If operation has not started yet, press the n
button.
The duration counts down on the display.
For the Steam type of heating, the duration starts
counting down after the heating up time.
23