Table of Contents
Advertisement
Check that the water tank is flush with the water
7.
tank recess.
Close the appliance door.
8.
8.7 Refilling the water tank
If the water tank runs dry during operation, steaming
will be paused.
Open the appliance door carefully.
1.
Remove the water tank from the tank recess.
2.
Fill the water tank with water.
3.
Insert the full water tank back into the tank recess.
4.
Close the appliance door.
5.
8.8 Setting the type of heating and the
temperature
Press the type of heating that you want to use.
1.
Press the temperature in °C or, depending on the
2.
type of heating, the setting.
Use the setting ring to set the temperature.
3.
Press
on the display to confirm the set temperat-
4.
ure.
If required, you can implement additional settings:
– Time-setting options
Press
to start the operation.
5.
a The appliance starts heating.
a The setting values and how long the appliance has
already been in operation are shown on the display.
When the food is ready, use
6.
ance off.
Note: The most suitable type of heating for your food
can be found in the description of the type of heating.
→ "Types of steam heating", Page 6
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
9 Time-setting options
For an operation, you can set the cooking time and the
time at which the operation should be finished. The
timer runs independently of the operation.
Time-setting
Use
option
Cooking time
If you set a cooking time, the appli-
ance stops heating automatically
once this time has elapsed.
to switch the appli-
Press
.
1.
Press
.
2.
Press the type of heating that you want to use.
3.
Reset the operation and use
4.
Changing the temperature
Once the operation has started, you can change the
temperature at any time.
Press
on the display.
1.
Press the temperature.
2.
Change the temperature with the setting ring.
3.
To confirm the change, press
4.
a The change is applied.
8.9 "Fill water tank" message
If you select a type of heating and the water tank is
only half full, the appliance displays the message "Fill
water tank".
If the water tank contains sufficient water for cooking,
start the appliance.
If the water tank does not contain sufficient water for
cooking, fill the water tank.
→ "Filling the water tank", Page 10
8.10 After using the Steam function
When you use the appliance, moisture and food rem-
nants remain in the cooking compartment afterwards.
Dry and clean the appliance after each use. Empty the
water tank.
After using the Steam function
Dry the cooking compartment.
1.
→ "Drying the cooking compartment", Page 19
2.
Empty the water tank.
→ "Emptying the water tank", Page 19
8.11 Displaying information
In most cases, you can call up information about the
function that you have just started. The appliance auto-
matically displays certain information, e.g. to ask you to
do/confirm something or to issue a warning.
Press
"Info".
1.
a Information is displayed for a few seconds.
To scroll through lots of content in the message,
2.
swipe over the display.
3.
If necessary, use
Time-setting options en
to start.
on the display.
to exit the message.
11
Advertisement
Table of Contents
