Setting The Water Hardness Range - Bosch HBC36D7.3 Instruction Manual

Setting the water
hardness range
Checking the water
hardness
Softened water
Changing the water
hardness range
16
Descale your appliance regularly. This is the only way
to prevent damage.
Your appliance automatically displays when it needs
descaling. It is preset to water hardness range II.
Change the value if your water is softer or harder.
You can check the water hardness with the test strips
supplied or ask your water supplier.
You can only dispense with descaling completely if
you exclusively use softened water. If this is the case,
change the water hardness range to "softened".
You can change the water hardness range in the
basic settings when the appliance is switched off.
1. Press and hold the ° button until "Select language"
appears in the display.
2. Turn the rotary selector until "Water hardness
range" appears.
3. Press the X button.
The display shows "2 medium".
4. Change the water hardness range using the rotary
selector. Possible values:
softened
1 soft
2 medium
3 hard
4 very hard
5. Press the ° button to leave Basic settings.
The change is stored.
I
II
III
IV