Bosch HBC36D7.3 Instruction Manual page 25

Changing the end time
The duration has elapsed
Timesetting optn
End
10:15
Exit with 0
1. Switch to End" using the rotary selector.
The time at which the operation will finish is shown
on the display.
2. Press theX button.
Timesetting optn
End
12:45
Exit with 0
3. Set the End to a later time using the rotary
selector.
4. Close the Time setting options by pressing the 0
button.
5. Press the n button to confirm.
The setting is adopted. The appliance is in
standby 0... . The End time is shown in the display.
When operation begins, the duration counts down on
the display.
The End time can be changed provided the appliance
is in standby. Press the 0 button. Switch to End time
using the rotary selector. Press the X
correct the End time using the rotary selector. Close
timesetting options using the 0 button.
A signal sounds. The appliance stops heating. The
duration 00:00:00 appears in the display. Press the 0
button to stop the signal.
button and
25