Assist Mode / Generate Mode - Raleigh Pedelec Groove User Manual

Checking Battery State of Charge
• Swipe your finger slowly over the touch port.
• Battery state of charge LED will illuminate.

Assist Mode / Generate Mode

The BionX propulsion system operates in four assist levels in the assistance mode, and in four charging
levels in the generate mode. In the assistance mode, your pedalling is assisted proportionally by an
electric motor that drives the rear wheel. A torque sensor is located on the axle of the electric motor and
measures the effort provided by the rider; this produces natural feeling assistance from the motor.
When in generate mode the electric motor functions as a generator and recharges the battery. When
going downhill, you can regulate your speed by varying the generate level. This generate function
provides a certain braking effect, however it does not replace legally required brakes. If either one of the
two brake levers (depending on bike model) is pulled, the drive system automatically enters generate
mode. The range can therefore be extended up to 15%, depending on the road conditions.
Assistance Level (A)
1
2
3
4
Generation Level (G)
1
2
3
4
Battery state Colour
100-85 % green
85-25 % amber
< 25 % red
Degree of Assist
35%
75%
150%
300%
Slight downhill grade, tailwind
Significant downhill grade, tailwind
Steep descent
Very steep descent
Riding Situation
Riding on level ground
Slight inclines, head wind
Steep hills, strong head wind
Very steep roads
9