Transmitting data
Bulletin Setting - Settings of transmission
The following functions are available. For details, refer to the corresponding pages.
Bulletin Setting - Background Adjustment
For the setting procedure,refer to
page
4-27.
Function
Sender
Stamp
2in1
2-Sided TX
Rotation TX
Registering a document on a bulletin board from another fax machine
Using F-code functions, documents can be registered on a bulletin board from a different fax machine. Enter
"SUB" for the F-code of the bulletin board where the document is to be registered, enter "SID/PWD" for the
bulletin board password, and then send the transmission to this machine.
!
Detail
If a document is already registered on the specified bulletin board, it is replaced with the sent
document.
4.5.17
Application - Polling TX (G3)
Originals previously saved in the machine's memory can be retrieved by the recipient.
-
Saved documents are deleted after they are transmitted.
-
Only 1 document can be registered for polling transmission.
Note
This function does not appear if the optional fax kit has not been installed.
Registering a document for polling transmission
Touch [Polling TX], and then specify settings, for example, for the resolution and density.
C200
"Background Adjustment (G3/I-FAX/IP/E-Mail/FTP/SMB/Relay)" on
Refer to
p. 4-28
p. 4-31
p. 4-29
p. 4-29
p. 4-30
4
4-35