Control Panel - Konica Minolta bizhub C200 User Manual

Control panel/touch panel
2 Control panel/touch panel
2.1

Control panel

No. Part name
1 Touch panel
2 [Mode Check] key
3 [Utility/Counter] key
4 [Fax/Scan] key
5 [Copy] key
6 [Reset] key
7 [Access] key
8 Sub power switch
9 [Interrupt] key
10 [Stop] key
11 [Start] key
12 Main power indicator
13 Keypad
14 [C] (clear) key
C200
1 2 3
Utility/Counter
Mode Check
Accessibility
Enlarge Display
Contrast
17 16 15
Description
Displays various screens and messages.
Specify the various settings by directly touching the panel.
Press to check the various settings.
Press to display the Utility screen and the Meter Count screen.
Press to enter Fax/Scan mode.
While the machine is in Fax/Scan mode, the indicator on the [Fax/Scan] key
lights up in green.
Press to enter Copy mode. (As a default, the machine is in Copy mode.)
While the machine is in Copy mode, the indicator on the [Copy] key lights up
in green.
For details, refer to the User's Guide [Copy Operations].
Press to clear all settings (except programmed settings) entered in the control
panel and touch panel.
When account track settings have been specified, press this key after entering
the account name and password in order to use this machine.
Press to turn on/off machine operations. When turned off, the machine enters
a state where it conserves energy.
Press to enter Interrupt mode. While the machine is in Interrupt mode, the in-
dicator on the [Interrupt] key lights up in green and the message "Now in Inter-
rupt mode." appears on the touch panel. To cancel Interrupt mode, press the
[Interrupt] key again.
For details, refer to the User's Guide [Copy Operations].
Press while copying to stop the operation. The copy job being performed is
deleted. For details, refer to the User's Guide [Copy Operations].
If the [Stop] key is pressed during scanning or dialing, a screen appears, re-
questing confirmation to delete a job. In the confirmation screen, select the job
to be deleted.
Press to start the copy, scan or fax operation. When this machine is ready to
begin the operation, the indicator on the [Start] key lights up in blue. If the in-
dicator on the [Start] key lights up in orange, the operation cannot begin.
Press to restart a stopped job.
Lights up in green when the machine is turned on with the main power switch.
Use to type in the number of copies to be produced.
Use to type in the zoom ratio.
Use to type in the various settings.
Press to erase a value (such as the number of copies, a zoom ratio, a size or
any other setting) entered using the keypad.
4 5 6
Fax/Scan Copy Reset
Access
ABC DEF
Power
Interrupt
GHI JKL MNO
Sto p
PQRS TUV WXYZ
Start
Main Power
14 13 12
2
7
8
9
10
11
2-2