Fax Settings; Fax Settings - Self-Id (G3/Relay); Fax Settings - Rx Functions (G3); Reception Mode - Konica Minolta bizhub C200 User Manual

Administrator Management settings
9.6

Fax Settings

9.6.1

Fax Settings - Self-ID (G3/Relay)

If the machine's name or telephone number is registered as an ID, the registered information will appear in
the recipient's fax reports and machine control panel, allowing the receiver to easily check where the fax was
sent from.
- A maximum of 12 letters, numbers or symbols can be registered for the machine's ID.
- Depending on the recipient's fax machine, the machine's ID may not appear. In this case, the registered
telephone number will appear to identify the machine.
Note
For details on registering the machine's telephone number, refer to
Information (G3/Relay)" on page
Settings can be specified only if the optional fax kit has been installed.
9.6.2

Fax Settings - RX Functions (G3)

Specify how a fax is received and the number of rings until the call is automatically answered.
Note
This parameter does not appear if the optional fax kit has not been installed.

Reception Mode

Select the fax reception method. (Default: Auto)
- Auto: Select this setting to automatically receive faxes.
- Manual: Select this setting to manually receive faxes.
Note
For details on selecting the answering method according to the reception method, refer to chapter 5,
"Receiving data (G3/IP/I-FAX)" on page
C200
9-19.
5-2.
"Fax Settings - Self-Telephone #
9
9-17