Interlogix TVE-110 User Manual page 40

2. Select the alarm input number of a camera.
3. Select the alarm input type, NO or NC.
4. Set the arming schedule for the alarm input.
5. Select the response method to motion detection.
Click the Linkage Method
the desired the response methods:
- Notify Alarm Recipient: Send a notification or alarm signal to remote
alarm host when an event occurs. The alarm host refers to the computer
installed with remote client software
- Send Email: Send an email with alarm information to a user or users
when an event occurs.
- Upload Snapshot: Capture the image when an alarm is triggered and
upload the snapshot to an FTP server.
Under Trigger Alarm
output when a motion detection event occurs. See "To configure an alarm
output" below on how to set up an external alarm output.
Select the channel to trigger recording when a motion detection event occurs.
If the camera is PTZ, select PTZ linking.
36
tab. Under Normal
Output, select the channel to trigger an external alarm
TVE-110/410/810/1610 H.264 IP Video Encoder User Manual
Linkage, check one or more of