Interlogix TVE-110 User Manual page 25

1. Click Configuration
NetHDD. The NetHDD window appears.
2. Enter the IP address of the network storage system and file path in the text
field.
3. Select the type of the network storage system: IP SAN or NAS.
NAS mode: Enter the IP address of the storage device.
IP SAN mode: Enter the IP address of the storage device.
4. Click Save to add the configured network disk.
5. Initialize the added network disk.
Click Remote Configuration
enter the HDD settings menu. The capacity, free space, status, type and
property of the added network disk are displayed.
If the status of the network disk is Uninitialized, select the disk and click
Format to start initializing it. When the initialization is complete, the disk
status becomes Normal.
Note: Up to 8 NAS or IP SAN disk can be connected to the encoder.
6. Set the property of the added network disk.
Select the HDD number. Select its property from the drop-down menu: R/W,
Read-only or Redundancy.
Note: Please refer to the IP SAN/NAS user manual on how to create a file
path in network management.
To configure SNMP protocol settings:
1. Click Configuration
The SNMP window appears.
TVE-110/410/810/1610 H.264 IP Video Encoder User Manual
> Remote Configuration
> Storage Management
> Remote Configuration > Network Settings > SNMP.
> Network Settings
> Basic Settings
>
to
21