Interlogix TVE-110 User Manual page 32

5. Click Save to save the settings.
To configure Multicast Address settings:
1. Click the Remote Configuration > Network Settings > Advanced.
Advanced window appears.
2. Enter the multicast address in the text filed.
3. Click Save to save the settings.
Note: The device will reboot automatically to activate the multicast address
settings.
To configure Remote Alarm Host settings:
1. Click the Configuration
Advanced. The Advanced window appears.
2. Enter the alarm host IP and alarm host port values.
The Alarm Host IP refers to the IP address of the remote PC on which the
CMS (Client Management System) software is installed, and the Alarm Host
Port must be the same as the alarm monitoring port configured in the
software (default port is 7200).
3. Click Save to save the settings.
28
> Remote Configuration > Network Settings >
TVE-110/410/810/1610 H.264 IP Video Encoder User Manual
The