Interlogix TVE-110 User Manual page 30

To configure HTTPS settings:
1. Click the Configuration
HTTPS. The HTTPS window appears.
2. Create the self-signed certificate or authorized certificate (see steps below).
Create the self-signed certificate
1. Click the Create
Enter the country, host name/IP, validity and other information.
2. Click OK to save the settings.
Create the authorized certificate
1. Click the Create
2. Download the certificate request and submit it to the trusted certificate
authority for signature.
3. After receiving the signed valid certificate, import the certificate to the device.
4. When you have successfully created and installed the certificate, check the
checkbox to enable the HTTPS function.
Note: After the HTTPS feature is enabled, the system will use the HTTPS
login mode by default when you input the IP address (e.g., https://192.0.0.64).
You can also input http://IP address/index.asp (e.g.,
26
> Remote Configuration > Network Settings >
button to create the following dialog box.
button to create the certificate request.
TVE-110/410/810/1610 H.264 IP Video Encoder User Manual