Zone2/3 Setup - Marantz SR7010 Owner's Manual

Contents Connections
ZONE2 Setup/ZONE3 Setup
Makes settings for audio playback with ZONE2 and ZONE3.
0 Values set for "Volume Limit" and "Power On Volume" are displayed according to
the setting specified for the volume "Scale" (v p. 211).
o Bass
Adjust bass.
-10dB – +10dB (Default : 0dB)
o Treble
Adjust treble.
-10dB – +10dB (Default : 0dB)
o High Pass Filter
Make settings for cutting the low range to reduce distortion in the bass.
On:
Off
(Default):
Front panel Display
Playback
The low range is attenuated.
The low range is not attenuated.
Rear panel
Settings
o Lch Level
Adjust the left channel output level.
-12 dB – +12 dB (Default : 0 dB)
o Rch Level
Adjust the right channel output level.
-12 dB – +12 dB (Default : 0 dB)
o Channel
Set whether to playback in stereo or monaural.
Stereo
(Default):
Mono:
282
Remote
Tips Appendix
Stereo playback.
Monaural playback.
Index