Speaker Selection - Marantz SR7010 Owner's Manual

Contents Connections
o When using headphones
n Headphone EQ
Set whether to use the graphic equalizer for headphones or not.
On:
Off
(Default):
o Speaker Selection
Select whether to adjust tones for individual speakers or for all
speakers.
All:
Left/Right
(Default):
Each:
Front panel Display
Playback
Use the graphic equalizer for
headphones.
Do not use the graphic equalizer for
headphones.
Adjust all speaker tones together.
Adjust the left and right speaker tones
together.
Adjust the tone for each speaker.
Rear panel
Settings
o Adjust EQ
Adjust tonal balance for each frequency band.
1. Select the speaker.
2. Select the adjustment frequency band.
63 Hz / 125 Hz / 250 Hz / 500 Hz / 1 kHz / 2 kHz / 4 kHz / 8 kHz /
16 kHz
3. Adjust the level.
–20.0 dB – +6.0 dB (Default : 0.0 dB)
0 Front Dolby, Surround Dolby and Back Dolby speakers can only be set when
63 Hz/125 Hz/250 Hz/500 Hz/1 kHz.
217
Remote
Tips Appendix
Index