Menu Map - Marantz SR7010 Owner's Manual

Contents Connections

Menu map

When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items
Dialog Level Adjust
Subwoofer Level Adjust
Surround Parameter
Audio M-DAX
Audio Delay
Volume
Audyssey
Graphic EQ
Picture Adjust
HDMI Setup
Output Settings
.
Component Video Out
Video
On Screen Display
TV Format
Front panel Display
Playback
This setting adjusts the output level to clarify the dialogue output from the center
channel.
This setting adjusts the volume level for the subwoofer.
Adjusts surround sound parameters.
Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
Compensates for incorrect timing between video and audio.
Sets the MAIN ZONE (room where the unit is located) volume setting.
Makes Audyssey MultEQ ® XT32, Audyssey Dynamic EQ
Volume ® , Audyssey LFC TM and Audyssey DSX
Uses the graphic equalizer to adjust the tone of each speaker.
Adjusts picture quality.
Makes settings for HDMI video/audio output.
Makes settings for video output.
Sets whether to use the component video output connector for MAIN ZONE or ZONE2.
Configures the on-screen display settings.
Sets the video signal format to be output for the TV you are using.
198
Rear panel
Settings Settings Tips
Description
® , Audyssey Dynamic
® settings.
Remote Index
Appendix
Page
204
204
205
210
211
211
212
216
219
221
227
231
231
232