Ipod Cannot Be Played Back - Marantz SR7010 Owner's Manual

Contents Connections
o iPod cannot be played back
Symptom
iPod cannot be connected.
0
0
The AirPlay icon ' is not
0
displayed on iTunes /
iPhone / iPod touch / iPad.
0
Audio is not output.
0
0
Audio is interrupted during
0
the AirPlay playback on
iPhone / iPod touch / iPad.
0
iTunes cannot be played
0
back through the remote
control unit.
Front panel Display
Playback
When using iPod by connecting it to the USB port, some iPod variations are not supported.
When iPod is connected by using a USB cable other than the genuine cable, iPod may not be
recognized. Use a genuine USB cable.
This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to
the same LAN as this unit.
The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the firmware to
the latest version.
The volume on iTunes / iPhone / iPod touch / iPad is set to the minimum level. The volume on iTunes /
iPhone / iPod touch / iPad is linked with the volume on this unit. Set a proper volume level.
The AirPlay playback is not performed, or this unit is not selected. Click the AirPlay icon ' on the
iTunes / iPhone / iPod touch / iPad screen and select this unit.
Quit the application running in the background of the iPhone/iPod touch/iPad, and then play using
AirPlay.
Some external factors may be affecting the wireless connection. Modify the network environment by
taking measures such as shortening the distance from the wireless LAN access point.
Enable the "Allow iTunes audio control from remote speakers" setting on iTunes. Then, you can perform
playback, pause, and skip operations through the remote control unit.
Rear panel
Settings
Cause / Solution
319
Remote
Tips Appendix
Page
Index
93
－
97
－
－
148
－
－
－