Playing Music From Bluetooth Device - Marantz SR7010 Owner's Manual

Contents Connections

Playing music from Bluetooth device

In order to enjoy music from a Bluetooth device on this unit, the Bluetooth
device must first be paired with this unit.
Once the Bluetooth device has been paired, it does not need to be paired
again.
1
Prepare for playback.
A Connect the supplied external antennas for Bluetooth/wireless
connectivity to the Bluetooth/wireless LAN antenna connectors
on the rear panel. (v p. 28)
B Press POWER X to turn on power to the unit.
2
Press Bluetooth to switch the input source to
"Bluetooth".
Bluetooth
Pairing Mode
Turn on Bluetooth from your mobile device's
settings menu, then select
"Marantz SR7010" when it appears
in the device list.
When using for the first time, the unit will go into the pairing mode
automatically and "Pairing..." will appear on the display of the unit.
Front panel Display
Playback
Cancel
Rear panel
Settings
3
Activate the Bluetooth settings on your mobile device.
4
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
Connect to the Bluetooth device while "Pairing" is being displayed
on the display of the unit.
Perform the connection with the Bluetooth device close to the unit
(about 3.3 ft/1 m).
5
When a number appears on the display of this unit,
check that it is the same number as that shown on the
screen of the Bluetooth device and then select "Pair"
for both the Bluetooth device and the unit.
At the end of the pairing, the device name appears on the display of
this unit.
6
Play music using any app on your Bluetooth device.
The Bluetooth device can also be operated with the remote
0
control of this unit.
The next time the input source is switched to Bluetooth, this unit
0
automatically connects to the last Bluetooth device that was
connected.
0 Enter "0000" when the password is requested on the screen of the Bluetooth
device.
114
Remote
Tips Appendix
Index