Usb Memory Devices Cannot Be Played Back - Marantz SR7010 Owner's Manual

Contents Connections
o USB memory devices cannot be played back
Symptom
"No connection" is
0
displayed.
0
0
0
0
Files on the USB memory
0
device are not displayed.
0
0
Files on a USB memory
0
device cannot be played.
0
0
Front panel Display
Playback
This unit cannot recognize the USB memory device. Disconnect and reconnect the USB memory device.
Mass storage class compatible USB memory devices are supported.
This unit does not support a connection through a USB hub. Connect the USB memory device directly to
the USB port.
The USB memory device must be formatted to FAT16 or FAT32.
Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
Files of a type not supported by this unit are not displayed.
This unit is able to display files in a maximum of eight folder layers. A maximum of 5000 files (folders) can
also be displayed for each layer. Modify the folder structure of the USB memory device.
When multiple partitions exist on the USB memory device, only files on the first partition are displayed.
Files are created in a format that is not supported by this unit. Check the formats supported by this unit.
You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
played on this unit.
Playback may not be possible if the album art file size exceeds 2 MB.
Rear panel
Settings
Cause / Solution
320
Remote
Tips Appendix
Page
Index
93
－
－
－
－
110
－
－
333
－
－