Remote Lock Function - Marantz SR7010 Owner's Manual

Contents Connections

Remote lock function

When connecting an IR receiver, enable the Remote lock function. When
the function is enabled, you can not perform operations with the remote
control unit.
By default, this function is disabled.
X
Front panel Display
Playback
ui ENTER
BACK
189
Rear panel
Settings
Disabling the sensor function of the
remote control unit
1
Press X while you press and hold BACK and ENTER
with the unit in standby mode.
2
Use ui to select "RC LOCK On".
3
Press ENTER to enter the setting.
Enabling the remote sensor function
1
Press X while you press and hold BACK and ENTER
with the unit in standby mode.
2
Use ui to select "RC LOCK zOff".
(z The currently set mode.)
3
Press ENTER to enter the setting.
Infrared light receiving function on the main unit is enabled.
Remote
Tips Appendix
Index