Marantz SR7010 Owner's Manual page 66

Contents Connections
z Channels output from the HEIGHT1 and FRONT WIDE/HEIGHT2 speaker terminals can be changed to the following patterns according to the speaker systems being used.
The two sets of height speakers can be used if you are not using the front wide speakers. Set this from "Amp Assign" in the menu. (v p. 249)
Front wide
Number of height/
speaker
ceiling speakers
2 speakers
Used
None
4 speakers
Not used
2 speakers
None
Front panel Display
Playback
Combination of height speakers to be used
Number of Dolby
Speakers
None
2 speakers
Front Height & Top Middle
Front Height & Rear Height
None
Front Dolby & Rear Height
2 speakers
Front Height & Surr. Dolby
Top Front & Surround Dolby
4 speakers Front Dolby & Surround Dolby
Rear panel
Settings
Combination pattern
Front Height
Top Front
Top Middle
Top Rear
Rear Height
Front Dolby
Surround Dolby
Back Dolby
Front Height & Top Rear
Top Front & Top Rear
Top Front & Rear Height
Top Middle & Rear Height
Front Dolby & Top Rear
66
Remote
Tips Appendix
Connected terminals
FRONT WIDE/HEIGHT2
HEIGHT1 SPEAKER
SPEAKER
Front Height Front Wide
Top Front Front Wide
Top Middle Front Wide
Top Rear Front Wide
Rear Height Front Wide
Front Dolby Front Wide
Surround Dolby Front Wide
Back Dolby Front Wide
Front Height Top Middle
Front Height
Front Height Rear Height
Top Front
Top Front Rear Height
Top Middle Rear Height
Front Dolby
Front Dolby Rear Height
Front Height Surround Dolby
Top Front Surround Dolby
Front Dolby Surround Dolby
Index
Top Rear
Top Rear
Top Rear