Speaker Installation/Connection (Advanced); Install - Marantz SR6006 Getting Started

Speaker installation/connection (Advanced)

This section provides the installation, connection,
and setup methods of speaker systems other than
the 7.1-channel system with surround back speakers.
For the speaker installation, connection, and setup
methods of the 7.1-channel system with surround
back speakers, see C page 4 "SETUP
Use Audyssey ® Auto Setup function of this unit
to automatically detect the number of connected
speakers and perform optimal settings for the
speakers to be used.
Procedure for speaker settings

Install

Connect (vpage 62)
Set up speakers (vpage 69)
Install
This unit is compatible with Audyssey DSX™
and Dolby Pro Logic gz
wider and deeper surround sensation.
WIZARD".
When using Audyssey DSX™, install front wide speakers or front
height speakers.
When using Dolby Pro Logic gz, install front height speakers.
Install the surround back speakers in a position 2 to 3 ft (60 to 90 cm)
higher than ear level.
Front height
speaker
• Point slightly
downwards
Front wide
speaker
At least
z1
3.3 ft / 1 m
Front
speaker
GViewed from the sideH
z1 Recommended for Dolby Pro Logic gz
z2 Recommended for Audussey DSX™
NOTE
Sound is not output simultaneously from the surround back speakers,
front height speakers, and front wide speakers. You can switch
between speakers by changing the settings in surround mode or
Audyssey DSX™.
When 7.1ch (Front height speaker) installed
(vpage 143)
(vpage 144), which offers an even
Surround
speaker
2 – 3 ft /
60 – 90 cm
z2
45˚
Surround back
speaker
• Point slightly
downwards
60
FHL
FL FR
SW
C
SL
Listening
position
z1 22˚ – 30˚ z2 22˚ – 45˚ z3 90˚ – 110˚
GSpeaker abbreviationsH
FL Front speaker (L) SL Surround speaker (L)
FR Front speaker (R) SR Surround speaker (R)
C Center speaker FHL Front height speaker (L)
SW Subwoofer FHR Front height speaker (R)
FHR
SR
vSee overleaf