How To Make Detailed Settings; Menu Map - Marantz NR1604 Owner's Manual

How to make detailed settings

Menu map

For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items
Dialog Level
Subwoofer Level
Audio
Surround Parameter
Tone
M-DAX
Audio Delay
Volume
Audyssey
Graphic EQ
Picture Adjust
HDMI Setup
Output Settings
Video
On Screen Display
TV Format
DVD
Description
Sets the output level to clarify the dialogue
output from the center channel.
This setting adjusts the volume level for the
subwoofer.
Adjusts surround sound parameters.
Adjusts the tonal quality of the sound.
Expands the low and high frequency components
of compressed audio content such as MP3 files
to enable richer audio playback.
Compensates for incorrect timing between video
and audio.
Set the MAIN ZONE (room where the unit is
located) volume setting.
Makes Audyssey MultEQ ® , Audyssey Dynamic
EQ ® and Audyssey Dynamic Volume ® settings.
Uses the graphic equalizer to adjust the tone of
each speaker.
Adjusts the video quality.
Makes settings for HDMI video/audio output.
Makes screen-related settings.
Select the on-screen display user interface
preferences.
Set the video output signal format for the TV you
are using.
Page Setting items Detailed items
Input Assign
109
Source Rename
109
Hide Sources
Inputs
109
Source Level
111
Input Select
Audyssey ® Setup
111
112 Manual Setup
Speakers
112
Information
112
IP Control
113 Network
Friendly Name
115
115
Settings
116
Diagnostics
118
Maintenance Mode
118
103
Description
Changes input connector assignment.
Changes the display name for this source.
Remove from the display input sources that are
not used.
Adjusts the playback level of the audio input.
Sets the audio input mode and decode mode.
The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically.
Perform when setting the speakers manually
or when changing settings made in Audyssey ®
Setup.
Display network information.
Enables network communication in standby
power mode.
The Friendly Name is the name of this unit
displayed on the network. You can change the
Friendly Name according to your preferences.
Make settings for wired LAN.
Used to check the network connection.
Use when receiving maintenance from a Marantz
service engineer or custom installer.
v See overleaf
Page
120
122
122
122
122
22, 91
124
128
128
128
129
130
130