Disposal - Hilti SID 14­A Operating Instructions Manual

Fault
The battery runs
down more quickly
than usual.
The battery doesn't
engage with an audi-
ble click.
The power tool or the
battery become very
warm.

10 Disposal

CAUTION
Improper disposal of the equipment may have serious consequences: the
burning of plastic components generates toxic fumes which may present
a health hazard. Batteries may explode if damaged or exposed to very
high temperatures, causing poisoning, burns, acid burns or environmental
pollution. Careless disposal may permit unauthorized and improper use of
the equipment. This may result in serious personal injury, injury to third
parties and pollution of the environment.
CAUTION
Dispose of defective batteries without delay. Keep them out of reach of
children. Do not attempt to open or dismantle batteries and do not dispose
of them by incineration.
CAUTION
Dispose of the batteries in accordance with national regulations or return
them to Hilti.
Printed: 30.09.2013 | Doc-Nr: PUB / 5070695 / 000 / 02
Possible cause
Battery condition is not
optimal.
The retaining lugs on the
battery are dirty.
Electrical fault.
The power tool has been
overloaded (application
limits exceeded).
Remedy
Have battery condition
diagnosed by Hilti Ser-
vice or replace with a
new battery.
Clean the retaining lugs
and check that the bat-
tery engages securely.
Contact Hilti Service if
the problem persists.
Switch the power tool off
immediately, remove the
battery and contact Hilti
Service.
Use the right power tool
for the job (don't use a
low-powered tool for
heavy work).
en
21