Hilti SID 14­A Operating Instructions Manual page 18

b) Do not expose batteries to high temperatures or fire. This presents
a risk of explosion.
c) Do not disassemble, squash or incinerate batteries and do not sub-
ject them to temperatures over 80°C (176°F). A risk of fire, explosion
or injury through contact with caustic substances may otherwise result.
d) Avoid ingress of dampness.Dampness may cause a short circuit
resulting in a risk of burning injury or fire.
e) Do not use batteries other than those approved for use with the
applicable power tool or appliance. Use of other batteries or use of
the battery for purposes for which it is not intended presents a risk of
fire and explosion.
f) Observe the special instructions applicable to the transport, storage
and use of Li-ion batteries.
g) Remove the battery before storing or transporting the power tool.
h) Avoid short-circuiting the battery. Check that the terminals on the
battery and in the power tool are free from foreign objects before
inserting the battery in the power tool. Short circuiting the battery
terminals presents a risk of fire, explosion and chemical burns.
Do not charge or continue to use damaged batteries (e.g. batteries
i)
with cracks, broken parts, bent or pushed-in and/or pulled-out
contacts).
j) If the battery gets too hot to touch, this may indicate that it is faulty.
Place the tool in a location where it can be kept under observation,
well away from flammable materials, and allow it to cool down.
Contact Hilti Service after the battery has been allowed to cool.
5.2.4 Electrical safety
Before beginning work, check the working area (e.g. using a metal
detector) to ensure that no concealed electric cables or gas and water
pipes are present. External metal parts of the power tool may become live,
for example, when an electric cable is damaged accidentally. This presents
a serious risk of electric shock.
5.2.5 Work area
a) Ensure that the workplace is well lit.
b) Ensure that the workplace is well ventilated. Exposure to dust at a
poorly ventilated workplace may result in damage to the health.
Printed: 30.09.2013 | Doc-Nr: PUB / 5070695 / 000 / 02
en
13