Specifying Your Genlock Settings - Matrox Mojito MAX Installation And User Manual

32
$
¦ Note
your final video production for broadcast.
8 Click OK to save your settings.

Specifying your genlock settings

You can select the source to which you want to genlock all devices connected to
your Mojito MAX system, as well as adjust the timing settings for all video
outputs from Mojito MAX. For an example of connecting an external sync source
to your system, see
¦ Note
Mojito MAX genlocks to your selected video input source.
° To specify your genlock settings:
Click the Settings tab in the Project window, and then double-click Video
1
Output
In the Matrox Playback Settings dialog box, click the Genlock tab.
2
From the Genlock Source list, select one of the following:
3
$
Chapter 5, Using Matrox Mojito MAX with Avid Media Composer
Allow Super White/Allow Super Black
to allow the highest luminance level of your video output to exceed the
standard maximum white level. Select Allow Super Black to allow the
lowest luminance level of your video output to fall below the standard
black level. These options apply to all video outputs.
Super white and super black should not be allowed when producing
"Typical Matrox Mojito MAX connections"
These genlock settings are used during playback only. During capture,
.
Internal Genlock to Mojito MAX's internal reference signal. Select this
option only if you don't have an external sync generator or other reliable
external video sync source.
Select Allow Super White
on page 16.