Setting Matrox Mojito Max As Your Default Audio Playback Device; Note About Using Sleep And Hibernation Modes With Mojito Max; Removing Your Matrox Mojito Max Software - Matrox Mojito MAX Installation And User Manual

10
Setting Matrox Mojito MAX as your default
audio playback device
You can use Matrox Mojito MAX as your output device for playing back audio
using Windows Driver Model (WDM)-based applications on your Windows
system, such as Windows Media Player and Adobe Soundbooth. To set Mojito
MAX as your default sound playback device in Windows, do the following:
Choose Start > Control Panel > Hardware and Sound > Sound , and
1
click the Playback tab.
Right-click Matrox WDM audio device LE , and click Set as Default
2
Device
Note about using sleep and hibernation modes
with
Mojito MAX
Before setting your computer to sleep or hibernation mode, make sure that you
first quit any application that is using your Matrox Mojito MAX hardware, such
as Matrox A/V Tools. As well, never disconnect or remove your Matrox Mojito
MAX hardware when your computer is in sleep or hibernation mode (always shut
down your computer first).

Removing your Matrox Mojito MAX software

You can remove the various Matrox Mojito MAX software components as
follows:
• To remove Matrox Mtx.utils from your computer, choose Start > All
Programs > Matrox Mtx.utils > Uninstall Matrox Mtx.utils
• To remove the Matrox effect patterns from your computer, choose Start >
All Programs > Matrox Effect Patterns > Uninstall Matrox Effect
Patterns
• To remove the Matrox VFW software codecs from a computer without
Matrox Mtx.utils, choose Start > All Programs > Matrox VFW
Software Codecs > Uninstall Matrox VFW Software Codecs
Chapter 2, Installing Your Matrox Mojito MAX Hardware and Software
.
.
.
.