Outputs - Matrox Mojito MAX Installation And User Manual

• CVBS IN (Composite video) Allows you to input SD video from an
analog NTSC or PAL device. Connect a composite video cable from a
camera, VTR, or other video input source.
¦ Note The component input is not available when using the CVBS input.
• AES IN (digital audio) Allows you to input stereo digital audio. Connect
a coaxial BNC audio cable from a camera, VTR, audio mixer, or other audio
input source.
• IN 1 and IN 2 (Balanced analog audio) Allows you to input balanced
stereo analog audio. Connect XLR cables from a camera, VTR, audio mixer,
or other audio input source.

Outputs

This section describes the outputs that are available on the Mojito MAX card and
I/O cable.
Matrox Mojito MAX card
• HDMI OUT Provides a Type C HDMI socket output for HD/SD HDMI
video, and up to eight channels of embedded audio, to a digital HDMI
device. HDCP is not supported on this output. This output supports 1:1 pixel
mapping for accurate monitoring on your HDMI display of NTSC, PAL,
1280 ×720, and 1920×1080 video. Connect an HDMI video/audio cable to
an HDMI monitor, VTR, or other digital HDMI device. You can also connect
directly to a home theatre system for surround sound monitoring.
¦ Note
The HDMI output supports YUV and RGB devices.
HDMI monitor calibration is available through this output. Use the Matrox
HDMI Calibration Utility to calibrate your HDMI monitor (see
"Calibrating Your HDMI Monitor for
• SDI OUT Provides an output for HD/SD SDI video, with up to eight
channels of embedded audio. Connect an SDI video/audio cable to a video
monitor, VTR, or other SDI device. You can also perform surround sound
monitoring through the SDI output by connecting to a third-party device,
such as an SDI audio de-embedder.
Matrox Mojito MAX I/O cable
• Y, Pb, and Pr OUT (Component video) Allows you to output HD or SD
video to an analog component device. Connect component Y, Pb, Pr video
cables to a video monitor, VTR, or other component device.
¦ Note The CVBS and S-Video outputs are not available when using the
component output.
• Pb/Y and Pr/C OUT (S-Video) Output connectors Pb/Y and Pr/C allow
you to connect an S-Video adapter cable (two male BNC to S-Video) for
outputting SD video to an analog S-Video device. Connect an S-Video cable,
Video").
Mojito MAX input and output descriptions
19
Chapter 4,