Specifying Your Audio Output Settings - Matrox Mojito MAX Installation And User Manual

34

Specifying your audio output settings

The simultaneous audio outputs on your Matrox Mojito MAX hardware allow
you to send your audio to a variety of devices at the same time. Your Avid editing
application and Matrox provide various settings to configure your audio output
on Mojito MAX.
° To specify your audio output settings:
Click the Settings tab in the Project window, and then double-click Audio
1
Project
In the Audio Project Settings dialog box, click the Output tab and specify
2
your desired audio output settings as explained in your Avid documentation.
To map tracks directly to audio output channels on your Matrox hardware,
click the Mix Mode Selection button to select Direct Out , and then select an
output channel on Mojito MAX for each audio track in your sequence.
Remarks
$
$
$
Chapter 5, Using Matrox Mojito MAX with Avid Media Composer
.
The Allow 16 channel output option is not supported on Mojito MAX.
For surround sound HDMI audio output, Matrox Mojito MAX supports
the 5.1 and 7.1 SMPTE settings only.
Matrox Mojito MAX supports the Audio tool so that you can monitor the
global output level of your sequence. If needed, you can use the Output
Gain (master attenuator) slider to adjust the overall output volume for all
tracks.