BeFore First use
All parts of the blender need to be thoroughly cleaned before being used for the first time
•
(see "cleaning" section).
assemBly oF the glass jug
Turn the glass jug upside down on a flat bench or table. Place the press ring on the jug and
•
press down until it clicks into place.
Place the sealing ring on the glass jug bottom opening.
•
Place the blade assembly on the jug, on top of the sealing ring, with the blades to the inside
•
of the jug.
Mount the jug base onto the glass jug and turn the jug base unit in a clockwise direction
•
until it is tightly fixed.
Turn the jug right way up.
•
inserting the glass jug
Check that the speed selector dial is set to '0' off.
•
Place the jug assembly onto the motor unit, ensuring it is seated correctly.
•
operating the Blender
Place the ingredients you wish to blend into the glass jug.
•
Fit the lid onto the jug, aligning the square tab with the handle and round tab with the
•
pouring spout. Press down firmly.
Insert the measuring cap into the opening of the lid, and turn it in a clockwise direction until
•
it locks.
Place your hand on top of the blender jug lid to hold the jug steady. Switch the motor unit on
•
to the desired speed or pulse setting using the speed selector dial.
NOTE: Always place your hand on top of the blender jug lid to hold the jug steady when you are
operating the device.
speed seleCtor dial
'1' Position - For light usage with liquids
'2' Position - For more solid consistency (E.g. mixing liquids and solid foodstuffs)
'P' Position - For ice crushing & short pulses at high speed.
NOTE: You have to turn the 'P' pulse switch repeatedly
'0' Position - Off.
useFul tips
When pureeing solid ingredients, place and blend small portions in the glass jug at a time,
•
gradually adding more ingredients.
When processing solid ingredients, cut them into small pieces (2-3cm) first.
•
When blending liquids into solid ingredients, start off first with a small amount of liquid,
•
gradually adding more liquid through the lid opening.
Always place your hand on top of the blender jug lid to hold the jug steady when you are
•
operating the appliance.
Be careful when processing hot liquids.
•
For stirring solid or very thick liquid ingredients it is recommended that you use the blender
•
set to 'P' pulse setting mode to prevent the blades from becoming stuck.