Table of Contents
Advertisement
aFter use
Turn the speed selector dial to the '0' off position and wait until the blades stop moving.
•
Switch the power off and remove the plug from the wall power outlet.
•
Lift the glass jug up to remove it from the motor unit.
•
Cleaning
Rinsing out the assembled glass jug:
Empty the glass jug and fill it with water.
•
Place the glass jug on the motor unit and turn the dial to pulse several times.
•
Empty the glass jug and rinse until clean.
•
Thorough cleaning of the dismantled glass jug:
Ensure that the glass jug is completely empty before you unscrew the jug base.
•
Turn the glass jug upside down on a flat bench or table. Unscrew the jug base.
•
CAUTION: Be careful when handling the blade assembly.
Remove the blade assembly, and the sealing ring.
•
Wash the glass jug and blade assembly in warm soapy water, rinse and dry thoroughly.
•
Replace the sealing ring on the glass jug bottom opening.
•
Place the blade assembly on the jug, on top of the sealing ring, with the blades to the inside
•
of the jug.
Mount the jug base onto the glass jug and turn the jug base unit in a clockwise direction
•
until it is tightly fixed.
Turn the jug right way up.
•
All removable parts are dishwasher safe.
•
Advertisement
Table of Contents
