Advertisement
BEFORE FIRST USE
CAUTION: Handle blades carefully.
• Remove all packaging material and any stickers from the product.
• As some parts may be packed separately, check to ensure all items have been unpacked
before disposing of the packaging.
• Clean all parts as instructed in the "CARE AND CLEANING" section of this manual.
USING YOUR BLENDER
Note: Prior to use, the blender jug should be dismantled and washed as
instructed in the "CARE AND CLEANING" section of this manual.
1. Uncoil the power cord from the storage area under the motor unit.
2. Sit the blender on a stable, level, dry surface.
3. Place jug assembly onto the motor unit, ensuring it is correctly seated.
Note: This jug can be placed in a number of positions on the base.
4. Place foods to be blended into jug, liquids first, then any solids.
5. Place lid on jug and press down firmly.
6. Insert the lid cap into the lid by aligning the tabs on the lid cap with the notches in the lid
opening. Turn the lid cap counter-clockwise to lock.
7. Plug the power cord into a wall power outlet and switch the switch on.
Note: When in use, do not leave blender unattended. When using hard foods,
such as ice, cheese, nuts and coffee beans, keep one hand on the lid to keep
blender in place.
8. To select the speed that best suits your desired task:
Press the button with appropriate action for the speed or function you would like to
use (See SPEED CHART on page 9.) For example: To prepare a smoothie: press the
SMOOTHIE button.
9. When blending thick mixtures, such as milkshakes, smoothies and frozen drinks press
the appropriate button. There is a pre-programmed cycle that will be integrated – the
blender will automatically pulse several times and then begin to blend at the
pre-programmed speed to blend the ingredients to a smooth mixture.
Note: For best results, do not run blender longer than 2 minutes total time.
10. To stop any function at any time, press the OFF button.
11. If mixture is not the desired consistency, run the cycle a second time.
12. Open the lid cap to add ingredients while the blender is running and drop or pour
ingredients through the opening. To open the lid cap, rotate it clockwise to loosen, and
then lift up to remove. Replace the lid cap by inserting it into the lid, ensuring the notches
line up with the lid, then rotate counter-clockwise to secure into place.
Important: Do not remove the lid while the blender is running.
13. When finished, press the OFF button. Make sure blades have completely stopped before
attempting to remove the blending jug from the base.
14. To remove the jug, grasp the handle and lift straight up.
5
Advertisement
