IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions. 2. To protect against risk of electrical shock do not put cord, plugs, or appliance in water or other liquid. 3.
Additional Important Safeguards 1. All users of this appliance must read and understand this Instruction Guide before operating or cleaning this appliance. 2. The cord to this appliance should be plugged into a 120V AC electrical outlet only. 3. Do not leave this appliance unattended during use. 4.
Getting to Know Your Russell Hobbs® 3 Speed Blender Product may vary slightly from illustrations. Before Using for the First Time CAUTION: Use extreme care when handling the Blade Assembly. Do not touch the Blades with your fingers. The Blades are very sharp and can cause injury if touched.
1. Carefully place the Rubber Seal Ring over the Blade Assembly. 2. Place the Blade Assembly in the Blending Jar, turning the Blade Assembly clockwise to tighten. NOTE: The Blade Assembly must be firmly attached to the Blending Jar before putting any foods or liquids into the Blending Jar. 3.
WARNING: When using the Blender, make sure the Lid is locked into position. The Blender will not operate unless the Lid is properly secured. NOTE: Do not fill the Blending Jar more than 3/4 full, 6.5 cups (50-oz.). Never operate when the Blending Jar is empty. 6.
User Maintenance Instructions This appliance requires little maintenance and contains no user serviceable parts. Do not try to repair it yourself. Any servicing requiring disassembly must be performed by a qualified appliance repair technician. Care and Cleaning CAUTION: Never immerse the Motor Housing, plug or cord in water or any other liquid.
Need help?
Do you have a question about the RHBLRET and is the answer not in the manual?
Questions and answers