Table of Contents
Advertisement
INSERTING THE GLASS JUG
•
Check that the speed selector dial is set to '0' off.
•
Place the jug assembly onto the motor unit, ensuring it is seated correctly.
OPERATING THE BLENDER
CAUTION: Do not place hot ingredients in the jug. Blending hot ingredients can create
pressure and/or may be ejected during blending which may result in a possible scalding
hazard. Hot ingredients may cause the glass blending jug to break.
CAUTION: Do not fill above the 1500ml line. If you do, the contents may force the lid off
when the motor starts.
CAUTION: When chopping or crumbing dry ingredients, use only the 'P' (Pulse) function in
short bursts. Running the blender continuously with dry ingredients will damage the blade
assembly.
•
Place the ingredients you wish to blend into the glass jug.
•
Fit the lid onto the jug, aligning the small round tab with the handle and large round tab with
the pouring spout. Press down firmly.
•
Insert the measuring cap into the opening of the lid, and press down firmly.
NOTE: The lid and the measuring cap must be securely in place before starting the blender. Do
not start the blender without the lid and measuring cap in place otherwise ingredients will be
ejected.
•
Place your hand on top of the blender jug lid to hold the jug steady. Switch the motor unit on
to the desired speed or pulse setting using the speed selector dial.
SPEED SELECTOR DIAL
'1' Position - For light usage with liquids
'2' Position - For more solid consistency (E.g. mixing liquids and solid foodstuffs)
'P' Position - For ice crushing & short pulses at high speed.
NOTE: You have to turn the 'P' pulse switch repeatedly
'0' Position - Off.
USEFUL TIPS
•
When pureeing solid ingredients, place and blend small portions at a time, gradually adding
more ingredients.
•
When processing solid ingredients, cut them into small pieces (2-3cm) first.
•
When blending liquids into solid ingredients, start off first with a small amount of liquid,
gradually adding more liquid through the lid opening.
•
Always place your hand on top of the blender jug lid to hold the jug steady when you are
operating the appliance.
•
For stirring solid or very thick liquid ingredients it is recommended that you use the blender
set to 'P' pulse setting mode to prevent the blades from becoming stuck.
AFTER USE
•
Turn the speed selector dial to the '0' off position and wait until the blades stop moving.
•
Switch the power off and remove the plug from the wall power outlet.
•
Lift the glass jug up to remove it from the motor unit.
6
Advertisement
Table of Contents
