Avery Dennison 64-Series User Manual page 8

12/14 Rev. 03
Remote operator
panel
 Always use only one operator panel at a time to operate the printer. (Using
 Only use the factory-installed cable.
 Don´t extend the cable.
USER MANUAL
– Chapter Offline operation 
Chapter Online operation 
– In topic section Info-Printouts and Parameter 
64-0x Gen. 3 (or higher) machines can be equipped with a remote operator
panel. For this, the printer must provide the appropriate - optional - connector,
see chapter Printer connections 
fitted (see service manual).
The button functions are the same as those on the standard operator panel.
Exception: The on/off switch is not available at the remote control panel.
With the remote control panel connected, both panels are active and show
the same information.
CAUTION!
Manipulating both operator panels simultaneously can cause malfunctions.
both operator panels alternately is admissible).
CAUTION!
If the connection cable is longer than 2.5 m, EMC-caused disturbances can
occur.
[10] Remote operator panel (article number A8293)
64-xx
on page 13 and
on page 14
on page 5. The connection can be retro-
Commissioning & Operation
8