Material Parameters - Avery Dennison 64-Series User Manual

03/13 Rev. 5.08-01 USER MANUAL
64-xx – 64-xx dispenser

Material parameters

The following three parameters are used to tell the printer the properties
of the label material with which you would like to work:
Parameter
PRINT PARAMETER > material type
PRINT PARAMETER > material length
PRINT PARAMETER > material width
SYSTEM PARAMETER > light sens. type
[Tab. 1] Important parameters for setting material properties
Advice on setting parameters can be found under "Operating the

parameter menu" in the topic section "Info printouts and parameters".
Function
Sets the type of material (punched or
continuous)
Sets the length of material
Sets the width of the material
Sets the type of light barrier (reflector
or transmitted light) suitable for the
material (marks or punches)
16
Einrichten