Avery Dennison 64-Series User Manual page 51

11/14 Rev. 03
AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x
mation about the job is displayed in the "Print control" console. While the print job is
processed, it is started newly in the „Standalone" console. The input fields are polled
again, with the previous entries as default. Alternating with the first input field, the text
„Start next job" is diplayed.

than one printjobs, only the first printjob is executed.

RAMETER > Single job mode

[Tab. 11] Keys for entering variable data

quantity „endless".
USER MANUAL
Each printjob file may contain only one printjob. If any printjob file contains more
The new start of the print job can be avoided by setting the parameter
to „deactivated".
Press the Esc button to go back to the file selection.
Operation
Increase by 1
Decrease by 1
(the predecessor of 0 is 9)
Enter
Delete/Cancel
It's also possible to enter a single „* " for the print quantity. This makes the print
Printer button Keyboard key
Feed Cursor Up
Cut (or Apply) Cursor Down
Online Enter
Esc Esc
12
Advanced Applications
SYSTEM PA-