Avery Dennison 64-Series User Manual page 6

12/14 Rev. 03
H Optional: Signal interface USI
•
•
I Optional: Mini-DIN connector
J Optional: start/stop signal input
•
•
K Centronics interface
L Power switch
M Mains power supply connector
N Connector for peripheral devices
•
•
•
•
USER MANUAL
4 inputs / 8 outputs
Standard at „64-xx Dispenser A"
To connect a remote operator panel
Standard at 64-xx Dispenser
To connect a foot switch (signal starts printer) or a stacker (signal stops
printer)
For parallel transfer of print data (cable is inclusive)
Turns the printer on/off
Connection to a mains socket using the provided power cable
Admissible peripheral devices are:
Cutter („Cutter 2000")
Rewinder („Rewinder 2000")
Applicator LTSI (with „64-xx Dispenser A" only)
Photoelectric switch at the dispensing edge (with „64-xx Dispenser M" only)
N
[8] Connector (N) for peripheral devices.
64-xx
Commissioning & Operation
6