Avery Dennison 64-Series User Manual page 62

11/14 Rev. 03
AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x
Changing a setting in
Click on the names of submenus and parameters to open them so that you can
the labeller menu
change the settings they contain.
Example
Making a change to
1. Click on "Parameter" link [9C].
2. Click on "PRINT PARAMETERS" link.
3. Click on "Materiallength" link.
4. A dialog box opens: [10].
5. Enter the required value in the entry field.
6. Click on the "Save" button.
The value is now transferred to the labeller.
[10] Example: Dialog box for entering value for the parameter
changes only come into effect after the next time the labeller is reset. In these cases,
the "Reset" button [11A] appears after the setting has been changed.
[11] Information (A): Changes made to the parameter setting do not come into effect until after a reset.
USER MANUAL
PRINT PARAMETERS >
Some parameters trigger a reset of the labeller, if they have been changed on
the labeller via the operator panel. However, if any of these parameters is
changed via the web server, the reset does not occur automatically. The
A
Advanced Applications
Materiallength:
PRINT PARAMETERS > Materiallength
23