Bluetooth Operation - Blaupunkt PP15DAB Owner's Manual

PP15DAB

BLUETOOTH OPERATION

Bluetooth involves a technology for wireless radio connection of devices over a short
distance. Devices with Bluetooth standard are transmitting between 2.402 and 2.480 GHz
in the ISM band (Industrial, Scientific and Medical). Interference can be caused for
example by WLAN-networks, DAB radios, cordless phones, or microwave ovens which
work on the same frequency band.
This device offers you the possibility to use a Bluetooth enabled device. The functional
radius is limited to approx.10 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced Audio Distribution Profile)
and has a music-player function, then you can also wirelessly transfer music to the device.
The A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio
signals are wirelessly transferred between the playing device (source) and the receiving
device.
Due to the different device manufacturers, models, and software versions, a full
functionality cannot be guaranteed.
Logging on devices (Pairing)
Before using your speaker with a compatible device, such as a mobile phone, for the first
time, you must pair and connect it to the device.
1. Ensure that the Bluetooth function is activated in your player (e.g. mobile phone). For
this, refer to the operation manual of your player.
2. Press and hold the
3. Press the M button repeatedly, until "Bluetooth Disconnect" is shown on the display. It
shows that this unit is available to pair with other devices.
Pair the Speaker
1. If you haven't paired this unit with a device, or the paired devices list is empty, pairing
mode is activated.
2. Activate Bluetooth on the compatible device, and set it to search for compatible
devices.
3. Select the speaker name: "PP15DAB" from the list of found devices.
Tips: Only one playback unit can be connected to the speaker. If the speaker is already
connected to another playback unit, the speaker will not appear in the BT selection list.
4. If your device asks for a passkey (depending on the device manufacturers, model, and
software version), then enter digits "0000"(four zeros) and press OK.
If pairing has been carried out successfully, "Bluetooth Connected" will be shown on the
display.
5. After connected completely, you can listen to music wirelessly through Bluetooth and
select music in Bluetooth device.
6. Press /OK button to pause or resume playback.
Press ">" button to skip to next track, or press "<" button to the beginning of current track
or previous track.
7. To stop the unit, press and hold the
/OK button to turn on the unit during standby mode.
/ OK button to turn off the device.
18